There are a few configuration files needed for the operation of the agent. By default they may all be found in the current home directory (see option --homedir).
This is the standard configuration file read by
startup. It may contain any valid long option; the leading
two dashes may not be entered and the option may not be abbreviated.
This file is also read after a
SIGHUP however only a few
options will actually have an effect. This default name may be
changed on the command line (see option --options).
You should backup this file.
This is the list of trusted keys. You should backup this file.
Comment lines, indicated by a leading hash mark, as well as empty
lines are ignored. To mark a key as trusted you need to enter its
fingerprint followed by a space and a capital letter
may optionally be used to separate the bytes of a fingerprint; this
enables cutting and pasting the fingerprint from a key listing output. If
the line is prefixed with a
! the key is explicitly marked as
Here is an example where two keys are marked as ultimately trusted and one as not trusted:
# CN=Wurzel ZS 3,O=Intevation GmbH,C=DE A6935DD34EF3087973C706FC311AA2CCF733765B S # CN=PCA-1-Verwaltung-02/O=PKI-1-Verwaltung/C=DE DC:BD:69:25:48:BD:BB:7E:31:6E:BB:80:D3:00:80:35:D4:F8:A6:CD S # CN=Root-CA/O=Schlapphuete/L=Pullach/C=DE !14:56:98:D3:FE:9C:CA:5A:31:6E:BC:81:D3:11:4E:00:90:A3:44:C2 S
Before entering a key into this file, you need to ensure its authenticity. How to do this depends on your organisation; your administrator might have already entered those keys which are deemed trustworthy enough into this file. Places where to look for the fingerprint of a root certificate are letters received from the CA or the website of the CA (after making 100% sure that this is indeed the website of that CA). You may want to consider disallowing interactive updates of this file by using the option --no-allow-mark-trusted. It might even be advisable to change the permissions to read-only so that this file can’t be changed inadvertently.
As a special feature a line
include-default will include a global
list of trusted certificates (e.g. /etc/gnupg/trustlist.txt).
This global list is also used if the local list is not available.
It is possible to add further flags after the
S for use by the
Relax checking of some root certificate requirements. As of now this flag allows the use of root certificates with a missing basicConstraints attribute (despite that it is a MUST for CA certificates) and disables CRL checking for the root certificate.
If validation of a certificate finally issued by a CA with this flag set fails, try again using the chain validation model.
This file is used when support for the secure shell agent protocol has been enabled (see option --enable-ssh-support). Only keys present in this file are used in the SSH protocol. You should backup this file.
ssh-add tool may be used to add new entries to this file;
you may also add them manually. Comment lines, indicated by a leading
hash mark, as well as empty lines are ignored. An entry starts with
optional whitespace, followed by the keygrip of the key given as 40 hex
digits, optionally followed by the caching TTL in seconds and another
optional field for arbitrary flags. A non-zero TTL overrides the global
default as set by --default-cache-ttl-ssh.
The only flag support is
confirm. If this flag is found for a
key, each use of the key will pop up a pinentry to confirm the use of
that key. The flag is automatically set if a new key was loaded into
gpg-agent using the option -c of the
The keygrip may be prefixed with a
! to disable an entry.
The following example lists exactly one key. Note that keys available through a OpenPGP smartcard in the active smartcard reader are implicitly added to this list; i.e. there is no need to list them.
# Key added on: 2011-07-20 20:38:46 # Fingerprint: 5e:8d:c4:ad:e7:af:6e:27:8a:d6:13:e4:79:ad:0b:81 34B62F25E277CF13D3C6BCEBFD3F85D08F0A864B 0 confirm
This is the directory where gpg-agent stores the private keys. Each key is stored in a file with the name made up of the keygrip and the suffix key. You should backup all files in this directory and take great care to keep this backup closed away.
Note that on larger installations, it is useful to put predefined files into the directory /etc/skel/.gnupg so that newly created users start up with a working configuration. For existing users the a small helper script is provided to create these files (see addgnupghome).